Description
Applications:
Bu-Tack 1 should be applied to surfaces at a temperature range of between +4ºC and +40ºC. For best performance the surfaces should be clean, dry, and grease free. The product should be unwound and lightly pressed into position leaving the release paper in place. On forming the joint the release paper is removed and the closing surface pushed firmly in place, pressure applied along the length of the joint and mechanically fixed.
ROOFING & CLADDING industry where it creates an excellent seal in situations such as side and end lap joints and the bead section is particularly recommended for large corrugated end lap sheet profiles. A copy of the independent test report to the National Federation of Roofing Contractors (NFRC) specification is available on the STP website.
HEATING & VENTILATION market has found this product to be preferable to other methods of sealing flanges on ducting due to its ease of use and solvent free formulation.
AUTOMOTIVE uses include sealing around the frames of sun roofs.
CARAVAN manufacturers have many applications such as sealing between mouldings and the outer skin, lap joints on the body work and other areas where fittings are attached piercing the outer skin.
FIRE PROTECTION is enhanced by use of an intumescent version Bu-Tack 1 FR.
Features and Benefits:
SELF WOUND ROLL PRESENTATION
SOLVENTLESS FORMULATION
INSTANT SEAL
DIRECT CONTROL OVER QUANTITY OF SEALANT USED IN THE JOINT
ENVIRONMENTALLY FRIENDLY
EASE OF USE
GOOD ADHESION ON BOTH FACES TO MOST BUILDING MATERIALS
*HIGH PUMPING RESISTANCE
Packaging:
1mm to 35mm THICK, 5mm to 150mm wide. ROLL LENGTH IS DEPENDANT ON THICKNESS.
Colours:
STANDARD COLOURS ARE BLACK, WHITE, AND GREY.
ANY OTHER COLOURS AVAILABLE SUBJECT TO QUANTITY.
Shelf Life:
Store the product in a cool and dry place.
24 months in ambient conditions.
Caution:
Keep out of reach of children.
Avoid contact with eyes and skin.
Reviews
There are no reviews yet.