Description
DIRECTIONS FOR USE:
Bond speed is very fast so ensure that parts are properly aligned before bonding. Activators may be required if there are gaps or porous surfaces. Some plastics may require application of a Primer.
Ensure surfaces to be joined are clean, dry and grease-free.
Unscrew nozzle from the tube and remove loosed plastic ring. Screw nozzle back onto the tube until the built-in piercer breaks through the membrane, while taking care not to squeeze the tube.
Apply GlueDevil Super Glue to one surface only.
Join surfaces immediately and apply pressure for 30 seconds.
Clear nozzle, replace cap and store in a refrigerator or deep-freeze for maximum product life.
HANDLING AND STORAGE:
Storage:
Keep products in the unopened container in a cool and dry place. Best when stored at 2°C to 8°C. Temperatures less than 2°C can adversely affect product properties. Do not freeze. Keep container tightly closed until ready for use.
Handling:
Material removed from containers may be contaminated during use. Do not pour any of the product back into the original container. Misuse of the product will void all warrantees.
PACKAGING:
3g single card, 3g value pack, 3g display card of 12
PRECAUTIONS:
Use in well-ventilated areas.
Avoid contact with skin and eyes. If contact with skin occurs, rinse with warm water or dissolve gradually with solvent such as acetone, or nitromethane. Do not try to remove forcibly. If adhesive gets into eyes, rinse thoroughly and seek medical attention immediately.
Keep out of reach of children.
Keep adhesive in a cool, dry place at 20°C -25°C (68°F -77°F). For long-term storage, refrigeration (2oC or 35oF) is recommended.
Reviews
There are no reviews yet.