Glue Devil Screw-It

SCREW IT! JUST GLUE IT is the ultimate combined building adhesive and sealant based on hybrid polymer technology with the most amazing strength to bond and seal virtually EVERYTHING to ANYTHING in any conditions. An excellent fixing adhesive that replaces nails, screws and other mechanical fixings.

Compare
Category:

Description

Properties:
Extremely strong adhesion
Incredible instant tack (grab)
Great primer-less adhesion
Can be applied to wet surfaces
Works underwater
Easy single component application
Environmentally friendly
Solvent, silicone and isocyanate free
Excellent UV resistance
Resistant to weathering and ageing
Paintable with all types of paints (including water-based paints)
Bonds dissimilar substrates

Application Details:
Sealing and bonding in almost every application imaginable. The following are just some examples: Instant bonding and fixing of house numbers, signs, large panels, wallboards, skirting boards, dado rails, cornices, key holders, picture frames, cladding, electrical boxes, names plates, car bodies, caravans, small mirrors, sanitary fixtures, marble, granite, carpets, ceramic tiles, wooden flooring, cover strips, window sills, sealing of floor joints and much more.

Application Temperature: +5 °C to +35 °C

Temperature Resistance: -40 °C to +90 °C

GLUEDEVIL SCREW IT! JUST GLUE IT is suitable for mounting and pasting of materials such as metal, aluminum, glass, plastic, wood and concrete with each other (it is not recommended to use in PMMA and polycarbonate type materials and there is no adhesion on silicones and bituminous substrates.

It can be used for construction industry, both indoors and outdoors as an elastic adhesive.

Sealing of building and construction elements
Kitchen and bathroom sealing applications
Roof constructions
Sealing of natural stones
Resistance to chemicals:
Good resistance to water, aliphatic solvents, mineral oils, grease, diluted inorganic acids

and alkalis. Poor resistance to aromatic solvents, concentrated acids, and chlorinated hydrocarbons.

Bonding time:
Maximum strength will be achieved after 24 hours.

Directions:
The application surface must be clean, dry and free of dust, oil and grease.
Apply adhesive in vertical/horizontal stripes with 10-15 cm distance in between to allow for air flow and bring the materials into position and press well to make sure that the thickness of the adhesive is minimum 2-3 mm.

Storage and Shelf Life:
GLUEDEVIL SCREW IT! JUST GLUE IT has a shelf life of 9 months (the expiry date is shown on the packaging), when stored at a temperature between +5°C and +25°C in its original unopened packaging.

Caution:
It is advisable to wear gloves
Keep out of reach of children
As this product is used outside our control, we cannot accept liability for any loss or damage whatsoever
Not suitable for PP, PE and Teflon

Reviews

There are no reviews yet.

Be the first to review “Glue Devil Screw-It”

Your email address will not be published. Required fields are marked *