Description
FEATURES & BENEFITS:
Dissolves surface contaminates without hard scrubbing
Cleans panel surface and increases performance
Repels water and contaminants
USAGE & STORAGE PRECAUTIONS:
Read all instructions before use. Only use clean tools and mixing containers. Additional water must not be added to product that has started to cure. Never exceed the recommended mixing ratios. Do not dispose unused product in drains. Do not apply to contaminated, under bound or damp surfaces. New plaster, concrete, brick work or screeds must be allowed to dry for a minimum of 28 days. Only apply to dry / damp free surfaces with a moisture content permanently less than 10%. DO NOT BUTT JOINT TILES. For tiles larger than 3m² provide for expansion joints on all sides of the tile and seal with a mastic sealer. Do not tile over expansion joints, leave open and fill with the appropriate filler.
Apply a mastic joint filler in both directions at 3 meters apart for exterior applications and 5 meters apart for interior applications. Joint fillers are also recommended for any structural protrusions like staircases, columns or brick work. Do not tile over structural cracks. Cold, wet weather will extend drying times, grouting times and traffic times. Eliminate hollow areas between tiles and the surface – make sure of 100% contact between the tile, the adhesive and the surface. Powafix Tile Adhesive is not suitable for use with porcelain tiles.
RECOMMENDED USES:
Cement and Polymer blend for improved adhesion
Suitable for interior and exterior use
Fast drying high adhesion formula
Reviews
There are no reviews yet.